Melspickup.com

If you find your Honeywell thermostat flashing cool on after changing batteries, then don’t panic yet because this is actually common issue of the devices. It may mean nothing if it happens for a short time only, but it may require more attention if the flashing occurs for more than five minutes. Here are several troubleshooting tips you can perform on it.

Troubleshooting Steps for Flashing Honeywell Thermostat

Below are some alternatives steps you to take when you find your Honeywell thermostat flashing cool on after changing batteries:

• See if the thermostat’s clock is set or it’s in setup mode

Did your household experience power outage as of recent or while you weren’t at home? If so, your thermostat may go into setup mode that can result in blinking Cool on indicator. You may also check and reconfigure the clock settings to make it set accordingly.

• Inspect the indoor AC filter

In theory, it is recommended to change the AC filter approximately once every three months. A dirty or clogged filter will make any unit to function harder, which may result in faster break down. Moreover, this may result in sudden drop of temperature or other component issues.

 

• Inspect the AC coils

Similar to the AC filter, you will also need to examine the external AC coils to check if it is blocked or in dirty condition. It is especially important for old unit that has been working for extended time, as dirt and dust may be collected by the coil, preventing air to properly flow. Your thermostat won’t be able to set the right temperature if this issue occurs.

 

You also need to examine if the coils need some cleaning by looking at the buildup of dirt. Remember to turn it off before you do some cleaning work. Furthermore, to lower the possibility of clogged up unit, it is also recommended to clean the nearby area.

 

• Try to reset the thermostat

If you have tried all the tips above and yet to find a success, then you may opt to reset the thermostat. This will cause the device to be back into the default settings. Other programs and installed settings will be removed, so note down any configuration you’ve made before.

 

To reset the thermostat, you need to know what exact Honeywell model that you own. For instance, a C-wire powered thermostat need the electricity connection to be turned off first before getting a reset for safety measure. On the contrary, a device with panel button features only needs you to press a button and hold it for several seconds to perform a factory reset. Other models may need you to execute the reset through the menu of ‘Preferences’.

 

In this case, you need to open the manual instruction of your specific thermostat model. After the reset is done, then set the configurations according to your preferences.

Most of the time, the issue of Honeywell thermostat flashing cool on after changing batteries will be resolved by using the tips above. However, if none works, then you may need to call a professional technician to check if your device went under more serious problems such as blown fuse, blocked sensor, or damaged wiring.

Read More »

Currently, making the roof of the house does not only require tiles in its manufacture. However, it has switched to using materials such as zinc or other metals to make roofs. The question that people have been asking all along is how long do metal roofs last?

This question will be answered in this article, so make sure you pay attention to it. Read until the end so you can consider whether the roof you have should be made of metal or use tiles in general. So if you know the durability and advantages offered by metal roofing, then you can decide which roof you should choose. Here is a brief explanation for you.

Metal Roof Resistance for Your Roof Choice

Basically, the resistance of this metal roof adjusts to the place and temperature in the surrounding environment. In addition, the use of metal roofing can last a long time depending on the choice of materials used. So if you want to get a roof that lasts a long time then you have to look for the best metal material. Here is a brief explanation for you.

1. Duration of Metal Roofing According to the Environment

It has been briefly explained to you if you ask “how long does metal roofs last?” then the answer is to adjust the environmental conditions. Why should you adapt to environmental conditions? Because it is associated with the nature of metals that can be corrosive. So you can predict, if you use a metal roof in the right environment, it can have a very long period of time to last. Here’s how long it lasts.

a. For mountainous or rural areas, metal or mild steel roofs can be claimed to last up to 100 years of use.

b. If the metal roof is used on the beach with a distance of about 200 meters from the coast, it can last only about 28 years.

c. If you are in the marine industry, then metal roofs only have a lifespan of about 18 years.

d. If it is very close to the beach (has a distance of 0-50 meters from the beach, then the age of the metal roof only lasts for a short time of about 2.8 years.

So that it is certain that the closer you are to the beach, the shorter the lifespan of this metal or light steel roof. This is because the humidity in the coastal area and the presence of saltwater on the beach can cause corrosion of metal roofs. So the most suitable solution for the use of metal roofing is to use it far from the coast to get a long life of metal roofing.

2. The Life of Metal Roofing Can Be Extended?

Unfortunately, the use of metal roofs cannot be extended. It’s just that if you really want to use a metal roof, then choose a metal roof that has fairly good material. This will make your metal roof durable. It is definitely not recommended on the coast to use metal roofing because it can result in its use very quickly.

The recommendation for a steel roof that can last a long time with very good material is to use Zinium. This steel roof is a steel roof that has the best quality so it is recommended for those of you who want to use mild steel as the roof of your building.

Advantages and Disadvantages of Using Metal Roofs

Of course, knowing the durability of a metal roof is incomplete without knowing the advantages and disadvantages of this part of the building. Therefore, here is the explanation for you.

1. Advantages of Metal Roofing

There are several advantages that you should understand as follows,

a. Its life is quite long, at least it saves you not to replace the roof for the next 20-50 years if you use a metal roof.

b. The modern model can be used for any home style.

c. Resistant to wind and fire so it’s safer

d. Save energy because metal roofing can provide cool air to the house that uses it.

e. Gives a classic impression to a house that uses a metal roof.

f. The lightweight makes the structure of the building to withstand the load not too large. So that it can preserve the integrity of the house.

You can get this advantage if you use a suitable metal roof and of course, many contractors recommend it.

2. Disadvantages of Metal Roofs

Of course, there are disadvantages that metal roofs have as follows,

a. Vulnerable to pressure. So if there is an incident such as a fallen tree, it can change the shape of the roof if it is hit by a tree.

b. Any extension or contraction of metal roofing can make the roof less resistant to corrosion.

c. Colors fade faster.

Thus the answer to the question of how long a metal roof lasts and the advantages and disadvantages discussed for your consideration.

Read More »

If you feel that the room temperature in your house is unstable and feels hot or you feel cold, then an easy way to overcome this problem is to regulate the temperature. As for products that can adjust your temperature automatically by using the Honeywell Thermostat. This product is perfect for those of you who need a very fast room temperature setting.

If you want to know this thermostat more clearly, then you need to read this article to the end. Hopefully, you can read this information and you know it well. Here is a brief explanation about How to reset honeywell Thermostat for you. I hope this helps.

Honeywell Thermostat Explanation and Functions

What is a thermostat? This tool serves to check the temperature and humidity in a room so you can find out the state of the room around you. In addition, this thermostat can also regulate the temperature and humidity in a room. As for the thermostat, there is a Honeywell type. Its functions and uses will be briefly explained as follows.

1. Connected to the air conditioner or cooler in your home.

This Honeywell thermostat will be connected to the air conditioner or other coolant that is owned in your home. So if it is connected, then you only need to adjust the thermostat to regulate all the air conditioners you have. Basically, this thermostat will make settings automatically according to your request about what temperature and humidity you want.

Of course, by using this thermostat, you can also save the energy used because the thermostat adjusts the temperature in the room. If the temperature is as desired, then the thermostat can turn off the cooler or keep it at a stable temperature.

2. It’s More Sophisticated

If in the past Honeywell thermostats had to be operated manually, now there is a wifi-based one. Because it is already based on wifi, then you can manage it via your smartphone. Not only that, because it is connected to wifi, the thermostat can also be controlled remotely.

In addition to controlling remotely, Honeywell that has been paired with wifi will provide information on what parts need to be replaced or repaired. So you can monitor and make improvements if there are notifications from Honeywell via your smartphone.

3. Have Security Features

Feel like someone often changes the temperature and humidity on your thermostat? If so, by using the latest Honeywell, you can easily adjust the safety features of your thermostat. You can use a lock so that only you can adjust the thermostat. This is very useful for someone who installs a thermostat for office or hotel needs where in fact many people pass by.

How To Set The Thermostat Properly And Correctly

If you already know the function of the Honeywell Thermostat, then you should also know how to adjust your thermostat. This explanation will be explained in general terms so that you can adjust it to the thermostat installed in your home or office. The following are tips and tricks for setting a good thermostat. Maybe for some model you also need honeywell thermostat reset code.

1. Set Fan Usage

Of course, there will be a temperature setting on the thermostat, but did you know if there is a fan setting on the thermostat. Basically, this fan setting is always available on the thermostat and its purpose is to provide air circulation without adding heat or cold. These settings can be made automatically or you can use them at any time.

The use of the fan is very good and of course energy efficient, so it is highly recommended to use it when you are traveling for a long time. So that when you come back the air circulation around your house becomes better and more comfortable.

2. Setting the temperature using AC

Basically, this system is similar to an air conditioner, but what makes a thermostat different is the way it regulates the temperature. Of course, this thermostat setting will have a temperature setting. You just adjust the temperature you want. Later the thermostat will adjust the temperature according to your request.

Later if the temperature has reached what you want, the thermostat will automatically turn off your air conditioner. Then if the temperature rises again, the AC will turn on again to lower the temperature according to your needs.

3. Regulate heat

This setting can be used if the weather or temperature in your house is cold. So how to set it just change the switch to heat. Then the process will be the same as setting the temperature when using the air conditioner. If the temperature is according to what you want, then the heater will turn off by itself. But if the warm air you ask for is reduced, then the heater will turn on.

That’s some important information about Honeywell thermostats and tricks for setting them up for you. Hopefully, it can be a consideration for you.

Read More »

If you choose a roof, make sure in advance what you want from a roof. Do you want yourself to be perfectly protected? Or do you want to have a roof that can protect you while providing a sense of coolness and comfort? Or do you want a waterproof roof? All of that you can consider if you understand what you want.

If you want a roof that is resistant to weather, it is recommended that you use a torch down roofing. This one roof has specifications that are suitable for the roof of the building you have. Currently, its use is not only for commercial buildings but can be used for residential buildings. If you want to know more about it, here are the advantages.

Advantages of Using Torch Down Roofing for Buildings

What is torch down roofing? Torch Roofing is one type of roof using a membrane as a layer in the use of the roof. Usually, the coating used is modified bitumen, synthetic rubber, or PVC. This membrane roof or torch roofing actually has a function so that water can slide freely and fall to the ground. The following are the advantages if you want to install this one model.

1. Weather Resistant

This membrane roof has the ability to withstand weather. Because the main function itself is waterproof, this roof is very easy to protect you against erratic weather. In addition, what makes this roof resistant to weather is that it can reflect ultraviolet light.

Then what makes this roof weather resistant is that it doesn’t need a connection so that it makes this roof resistant to what is called a leak. So that in rainy weather, this roof can prevent you from getting wet because of the rain. In addition, this roof has fairly long durability, which is about 20 years.

2. Easy to renovate

By using materials such as modified bitumen or currently there are models using synthetic rubber or PVC, making this model roof easier to renovate. If, for example, there is a leak, it can usually be found immediately because it means that there is an incorrect connection.

However, the weakness of the membrane roof using asphalt is that it needs to be given a ballast so that if there is damage it needs to be patched by re-coating. But that doesn’t prevent it from being very easy to fix. Meanwhile, if you use other materials, it is easier to repair.

3. Save Cost

Of course, if it is easy to renovate, the installation torch down roofing cost will be more efficient. In addition, because this material can be found anywhere, you can easily choose the material. If you use asphalt type because it has a strong material and can last a long time, then you only need to add gravel as an addition to strengthen the torch roofing.

But if you use a type of membrane roof made of rubber or PVC, then you can install it right away. So you don’t have to worry about having trouble finding materials. You just choose and install it in your building.

Thus a brief discussion about torch down roofing or membrane roofing. The choice of membrane material is adjusted to the needs of the building you currently have. If you feel it is in accordance with what you want, don’t forget to immediately install the membrane for your roof.

Read More »

If you want to install a water heater, of course, you want to have warm water provided when you take a shower without having to cook it first. So this water heater is very important to be installed for those who like bathing with hot water. In addition, for those whose homes are in areas where the temperature is cold, you can install this tool so you don’t feel cold.

But when installing, sometimes people forget the things that must be known before installing a water heater. So that it causes regret in the future because it does not match your expectations. Therefore, make sure you don’t regret knowing the things to consider when installing a water heater for your home.

Things You Shouldn’t Forget When Installing a Water Heater

There are things that must be considered if you want to install a water heater in your home. This must be considered so that you do not feel that what you are doing is in vain. Do not let you feel that the use of electricity or gas is very wasteful because you are not careful in the process of selecting a water heater. So if you don’t want that to happen, here are the things you should do before installing a heater for your bath.

1. Knowing the Type of Heater Used

Currently, there are many types of water heaters that can be used and installed in your home. Some depend on the shape and model, some have many choices of how to heat water, and some are based on a lot of energy used. The many types make you have to do research first before using it.

Do not let you choose any type of heater for water in your home. For example, if the electrical voltage in your home is small, then do not install a water heater using electricity as the heating source and this applies to other types as well.

2. Knowing the specifications of the water heater

Obviously, knowing the specifications of the water heater can save your finances. Because if you know how much energy is needed to heat water, you can calculate properly and accurately your monthly expenses.

Usually, on a water heater, there is an EF or Energy Factor unit. Of course, this will affect the ability of the machine to heat water. The higher the EF, the more efficient the energy used. So you can compare which one is suitable for you to use.

3. Choose a heater that is constant or not constant in temperature

Choosing this is also important because there are types of heaters whose water temperature is only constant and can be changed. In your opinion, which one is more economical? If you want to be more efficient, then you can choose a heater whose water temperature is constant, so there is no change in temperature in the heating process.

But if you feel you want to adjust the temperature of the water you use, then you choose a water heater that can be adjusted. So you can be even more comfortable when using it for bathing but at a fairly large cost because it is not too economical.

4. Ensure the safety of the water heater you choose

Ensuring the safety of your water heater is very important. This relates to what if things happen that are not desirable and how to deal with them. Make sure you know the security system that is on the water heater. Usually, on the water heater, there is already a safety element in the form of a waterproof switch or safety device on the water heater.

So you just need to know how to deal with it if a problem occurs and you will calmly use the heater for bathing. Safety is number one so you have to think carefully when you intend to buy a water heater.

Thus a discussion of the things that must be known before installing a water heater. Hopefully, this information can help you find the best water heater for your home. Also, make sure to know the installation services from the beginning of the purchase so that there are no price changes after they are installed in your home.

Read More »

Definitely, if you do home repairs, you have to spend a budget so that they can be completed properly. Indeed, this budget can also swell if it is not managed properly. So for those of you who want to save your budget when repairing your house, here are tips that you can use to save costs when renovating your home.

Home renovations must be carried out regularly so that the house does not suffer severe damage. So that repair costs do not swell because repairs are too neglected. So this one tip is very useful for those of you who are planning to repair your home. Check out the following tips so that you understand them well.

Cost Saving Tips When Doing Home Renovations

The main reason for doing home renovations is because of minor damage that occurs to your home. Other reasons could be used to beautify the house or perform routine maintenance. So if you intend to renovate, then you are ready to pay. The following will briefly explain to you how to save costs when renovating a house.

1. Priority in Renovation

Use a good system and priority when doing renovations. Starting from inside the house first then from outside the house. Why does it have to be from the inside first? So that your home renovation can ensure your comfort and safety when living in the house.

Instead of painting the outer walls, it’s better to first fix the water faucet on your sink. Make sure this priority must be maintained so as not to make you waste a lot of money on repairs that could actually be done in a few years. You have to choose which one to repair so that your home functions properly and correctly.

2. Don’t Delay Repairs

In addition to priorities, the thing you should know in saving home repair costs is not to delay repairs. Delaying repairs will cost you more. Maybe you think it’s better if it’s damaged and replaced, but in fact repairs like this cause costs to swell.

For example, if there is a leaking roof, then it should be handled immediately rather than leaking when it rains, weathering other parts that should be saved if you fix it directly. In this case, repairs will cost you quite a lot and make you spend a lot of money. If you don’t want this to happen, then make repairs immediately so that you can save your costs.

3. Perform Routine Maintenance

Prevention is better than cure is the right metaphor in owning a home. It’s better to take care of it than to pay for repairs. So if you want to be really frugal for your home affairs, then do maintenance on your home often.

You can take care of your home by making sure the functions in your home are good. If there is minor damage, you can immediately schedule repairs. If there is a function that is less than normal, you already know when to replace the part. So that in the maintenance process, you can prepare funds for periodic repairs.

Those are some tips that you can use when doing home repairs. Of course, the number three tip can save on renovation costs. So for those of you who want to make improvements to your home, follow these tips so you can save as much as possible.

Read More »

If you want to build a house, then there are various models and designs for the development of your new home. These various models and designs have their own uniqueness that you can enjoy. If you want to use a unique model, you should first find out what the dream house model is for you.

If you are searching for a new model for your home improvement, you are in the right place because this article will discuss home designs that you can choose for your prospective home. There are many models available, but you will be given several choices that are currently trending. If you want to know, here’s a brief explanation for you.

House Models That Are Trending in 2021

Talking about home designs and models, there are many kinds and variations in a design. The model of the house also makes the house look more unique and does not appear as the personality of the owner of the house. If you feel more curious, here is an explanation of the model or home design that will be trendy in 2021.

1. Minimalist Model

This model has become one of the most popular models in home improvement. It will certainly be widely used because of the minimalist living concept. This house model has the most basic design concepts and needs in a house. This point is concerned with the use of the house in general.

Minimalist design has a house shape that adapts to function. If you want to have two rooms, one bathroom, living room, and dining room, the house will have that concept. So that this minimalist concept has a small form so that sometimes it leaves a fairly wide page.

2. Modern Model

This modern model is actually a combination of a minimalist home style that is made more modern. So it can be said that this model house is a minimalist house made with a distinctively modern and luxurious style. Of course, in terms of cost, this modern model house has a greater cost in its manufacture compared to the minimalist model.

The cost becomes very huge compared to minimalism because the concept created will be very luxurious and has automatic functions that can make this house a home that can use smartphones in its operation. Can also have a model with a lot of use of glass so that the contents of the house are more visible.

3. Classic Models from Various Countries

Currently, the classic model is also loved by many people because of its classic and very aesthetic impression. There are classic models that are luxurious and simple. Open means simple, but the impression that is used is comfortable. Then the luxurious model also makes the house look more manly.

It can be seen that using these classic models will be based on countries such as France, Italy, and others. You can choose to depend on whether you want to choose a simple classic type to feel the comfort or classic splendor that makes your home look luxurious. The choice is yours.

Those are some things related to the design or model of home development that can be explained to you. Hopefully, you can choose one of the recommendations given to you. If you want other designs, you can also choose because the design of the house is a dream of those of you who hope to be realized.

Read More »